olram30
Not That Kind of Engineer
These jl have zero room. Engine bay is jam packed. Crazy
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Fresh start.
- Thread starter olram30
- Start date
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
Got the diff filter hooked up and the fender liners in. I don't really want to take everything apart to paint. Might just mask everything off. Pita but half decent. 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
benatc1
New member
Both look really good, think I missed it but what liners are those?
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
Artec. The only ones I've seen are these, dv8 and metalcloak has only fronts. Some of the holes in the back didn't line up. The 3 bottom. I'm having a hard time recommending these. They are decent
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
Good idea. I don't really want to take them off again. I have to remove the front drivers when I get the arb compressor. I'll try the foil trick tomorrow.
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
I think instead of painting the clips, I'm just going to buy these and replace them 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
doubletapdaddy
Caught the Bug
Although I do not have any personal experience with JK or JL Fender clips, I have read that they are not interchangeable. Why? I do not know. I just thought I'd give you a heads up so you can do a little more research.
olram30
Not That Kind of Engineer
Hmmmm, I'll do more research. If anything I'll plastidip the fuckers
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
I got them painted. The white fender clips are really bugging me now. Anyways, next project is the onboard air. Hopefully I can get the wayalife acm and arb compressor soon. Then a winch. 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
tchmotorsports
Member
Im digging those fender wells,clean look.
doubletapdaddy
Caught the Bug
With regards to the white fender clips... Have you thought about just picking up a bunch of black hole plugs? My local automotive store always has a pretty good selection. Also, as an alternative to painting, I wonder if soaking them in Black Rit Dye would work (that is if you can get them out without breaking them). That's how I change the colors on the plastic components on my RC trucks. I let them soak in undiluted dye overnight.
olram30
Not That Kind of Engineer
Went mudding today. I can't get into the mountains yet because of the snow. I don't have a rti ramp or a fork lift, so had to find spots where I can check clearances. About perfect, the tires clear the fenders just right. A few issues, but I can fix them with a evo part. Really happy with the dynatrac lift. Plenty of up travel and droop. 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
I really would like these for peace of mind. The shock was really close, pretty much touching the frame. These are on evo mfg website and there's a part number. I just can't find them anywhere. Maybe bubba at exodus can help. 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
WiscoHR
Member
Seeing these pics is really swaying me towards the fender chop. Your tires stuff nicely and mine rub on the outside of the stock fenders. It’s either trim or more lift and more bumpstop.
Sent from my iPhone using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
Also, with wide axles and 3.5" backspace rims, it still rubbed at full lock and hit the fender liners. Enough to rub the paint off. 
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app
olram30
Not That Kind of Engineer
Thanks Eddie. Gonna need the wayalife acm soon! [emoji41]
Sent from my SM-N960U using JL Wrangler Jeep Forum mobile app