tobyw
Member
Battling a case of steering shimmy when I hit random bumps. Does not happen every time, even over the same bump(s). I've got 3" of lift up front, 2" in back, stock UCA's, adjustable LCA's set to 24-5/8", and the flat spot on the front of the pumpkin reads +1.8* while the flat spot on the upper ball joint reads +9*... Have I got too much caster dialed and that is causing the random shimmy? All hardware is torqued and there is no apparent slop or damage to any TRE's or anything else. Toe is 1/4", also. Appreciate any thoughts on where to go from here.