asmith1923
New member
All, first if this is a duplicate I apologize, I searched but couldn’t find anything here.
I installed the Smittybilt winch and bumper and removed the spare tire. What I ended up with was the front is 1 5/8” lower than the front. Otherwise, I’m a stock 19 JLUR.
My next mod is to install the MOPAR 2” lift, but I’m concerned about the hot rod rake. What size spring spacers would you recommend to correct my problem? Or should I buy the kit and buy two front 3 1/2” aftermarket lift springs to install with the kit?
I’m think the later will leave me with the original spring rate, instead of the loaded OE spring rate with the spacer option.
Thoughts?
Tony
19 JLUR Mojito!
I installed the Smittybilt winch and bumper and removed the spare tire. What I ended up with was the front is 1 5/8” lower than the front. Otherwise, I’m a stock 19 JLUR.
My next mod is to install the MOPAR 2” lift, but I’m concerned about the hot rod rake. What size spring spacers would you recommend to correct my problem? Or should I buy the kit and buy two front 3 1/2” aftermarket lift springs to install with the kit?
I’m think the later will leave me with the original spring rate, instead of the loaded OE spring rate with the spacer option.
Thoughts?
Tony
19 JLUR Mojito!
Last edited: