Installing Mopar Door Sill Guards

tallguy26

Member
Quick guide on how to install the Mopar door sill guards on your new JL wrangler. Mopar part# 82215394

We will start with the front.

Step 1: Clean the area then wipe down with the included alcohol pad.
20180322_093246.jpg

Step 2: Grab the correct door sill. They are labeled on the bottom for door and side.
20180322_093444.jpg

Step 3: Line the small arrow on the guard up with the seam on the body.
20180322_093525.jpg
20180322_093253.jpg
20180322_093600.jpg

Step 4: Making sure that you have the guard all the way back against the seam remove the 3M tape and apply pressure to guard to make it stick.
20180322_093743.jpg

If you have a 2 door just repeat for the passenger side and you are done.

Now for the Rear doors

Step 5: Grab the shorter rear guard for the correct side. These are labeled like the fronts.
20180322_093939.jpg

Step 6: Line up the small arrow with the body seam as shown.
20180322_093945.jpg
20180322_094010.jpg
20180322_094100.jpg

Step 7: Make sure that you are flush with the door seam and remove the 3M tape cover and apply pressure.
20180322_094102.jpg

Repeat for passenger and you are all done.
 

Attachments

  • 20180322_093200.jpg
    20180322_093200.jpg
    149.6 KB · Views: 182

Cozdude

Guy with a Red 2-Door
Simple enough lol thanks for the install pics. Great idea by mopar to have the little arrow to show you where to put it
 

Top