Results 1 to 10 of 10

Thread: I did not find the right solution from the internet.

  1. #1
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    Wheel refinishing

    HI,

    Does anyone know of a reputable high-quality shop in the area for alloy wheel refinishing? There's a guy who goes around to various dealers in the area to do this work, but he won't redo a wheel that he previously touched-up.

    Please help.

    I did not find the right solution from the internet.

    References:



    Thanks
    Last edited by Cozdude; 03-22-2018 at 02:57 AM.

  2. #2
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    I did not find the right solution from the internet.

    HI,

    As a last ditch effort, I am posting here to see if someone can help me.
    I have a 2013 Jeep wrangler rubicon. I used the Diable trinity to adjust tire size, turn on fog lights, lockers etc. While I was at it, I thought I would try the 87 performance tune. Well everything loaded. I still dont understand what the fog light or locker functions actually do. But that is trivial compared to this:
    The jeep had been sitting for a while I was installing a bunch of new goodies. I had used the on board air to air up my new tires and ran my batteries a bit low. That may have been the source of the problems
    I go the trinity, updated it and plugged it in. It had some issues writing the tune but eventually it did. The jeep ran a bit rough and I was getting an intermittant error code for a cylinder misfire. I played with the "off road" features for quite a while but never really udnerstood how they worked. I tried to restore the stock tune but my voltage had dropped a bit and it took a few trys with a trickle charger attached to the batteries. I then thought I would try out the superchips trail dash to see if it would do any better. The trail dash just gave me an infinate loop of trying to write, failing and then trying to restore stock and failing. Now neither tuner will communicate with the ECM and the jeep will not start. I have charged the batteries fully and still nothing. I unplugged the battery completely for a few days to "reset" and still no communication with the tuners and no starting.Is there a way to get the ecm to respond? Do I need to go to the dealer for a new computer or retune?Any help would be greatly appreciated. I am tired of having a really expensive lawn ornament

    Please help.

    I did not find the right solution from the internet.

    References:



    Thanks
    Last edited by JTCO; 04-25-2018 at 03:57 AM.

  3. #3
    Nothing but a Thing
    Join Date
    May 2017
    Location
    Michigan
    Posts
    1,303

    Dead 2013 jeep wrangler

    Quote Originally Posted by kevinmanuel View Post
    HI,

    As a last ditch effort, I am posting here to see if someone can help me.
    I have a 2013 Jeep wrangler rubicon. I used the Diable trinity to adjust tire size, turn on fog lights, lockers etc. While I was at it, I thought I would try the 87 performance tune. Well everything loaded. I still dont understand what the fog light or locker functions actually do. But that is trivial compared to this:
    The jeep had been sitting for a while I was installing a bunch of new goodies. I had used the on board air to air up my new tires and ran my batteries a bit low. That may have been the source of the problems
    I go the trinity, updated it and plugged it in. It had some issues writing the tune but eventually it did. The jeep ran a bit rough and I was getting an intermittant error code for a cylinder misfire. I played with the "off road" features for quite a while but never really udnerstood how they worked. I tried to restore the stock tune but my voltage had dropped a bit and it took a few trys with a trickle charger attached to the batteries. I then thought I would try out the superchips trail dash to see if it would do any better. The trail dash just gave me an infinate loop of trying to write, failing and then trying to restore stock and failing. Now neither tuner will communicate with the ECM and the jeep will not start. I have charged the batteries fully and still nothing. I unplugged the battery completely for a few days to "reset" and still no communication with the tuners and no starting.Is there a way to get the ecm to respond? Do I need to go to the dealer for a new computer or retune?Any help would be greatly appreciated. I am tired of having a really expensive lawn ornament

    Please help.

    I did not find the right solution from the internet.




    Thanks
    They always tell you never mess with programming unless battery is fully charged. Unfortunately this is why. It's quite likely the PCM had a voltage dip mid flash and now it's bricked. You will likely have to take it to dealer.

    Sent via....
    Last edited by notnalc68; 03-22-2018 at 04:15 AM.

  4. #4
    That dude from Mississippi notnalc68's Avatar
    Join Date
    Mar 2017
    Location
    Madison, MS
    Posts
    2,288
    Quote Originally Posted by kevinmanuel View Post
    HI,

    As a last ditch effort, I am posting here to see if someone can help me.
    I have a 2013 Jeep wrangler rubicon. I used the Diable trinity to adjust tire size, turn on fog lights, lockers etc. While I was at it, I thought I would try the 87 performance tune. Well everything loaded. I still dont understand what the fog light or locker functions actually do. But that is trivial compared to this:
    The jeep had been sitting for a while I was installing a bunch of new goodies. I had used the on board air to air up my new tires and ran my batteries a bit low. That may have been the source of the problems
    I go the trinity, updated it and plugged it in. It had some issues writing the tune but eventually it did. The jeep ran a bit rough and I was getting an intermittant error code for a cylinder misfire. I played with the "off road" features for quite a while but never really udnerstood how they worked. I tried to restore the stock tune but my voltage had dropped a bit and it took a few trys with a trickle charger attached to the batteries. I then thought I would try out the superchips trail dash to see if it would do any better. The trail dash just gave me an infinate loop of trying to write, failing and then trying to restore stock and failing. Now neither tuner will communicate with the ECM and the jeep will not start. I have charged the batteries fully and still nothing. I unplugged the battery completely for a few days to "reset" and still no communication with the tuners and no starting.Is there a way to get the ecm to respond? Do I need to go to the dealer for a new computer or retune?Any help would be greatly appreciated. I am tired of having a really expensive lawn ornament

    Please help.

    I did not find the right solution from the internet.

    References:




    Thanks
    I hope you find an answer, although this forum is about the new 2018 JL Wrangler. In the meantime, please do not post the spammy ad links, that we removed from your posts.


    Sent from my iPhone using JL Wrangler Jeep Forum mobile app
    Last edited by JTCO; 04-25-2018 at 03:54 AM.

  5. #5
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    I didn't find the right solution from the Internet.

    HI,

    Anyone have experience with Half Pints Day Care (in the new plaza on Main St, near Villa Roma and the butcher)? My family is in the early stages of checking out day care providers and thought someone on Tewksbury Issues might have experience (either good or bad) with Half Pints.

    Please help.

    I didn't find the right solution from the Internet.

    References:

    Thanks!
    Last edited by JTCO; 04-25-2018 at 03:54 AM.

  6. #6
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    Paivakoti/daycare question

    HI,

    I have a question concerning something which occured at my 3 year old's day care yesterday. Unlike in the US, all kids are told they must disrobe all the way down to their underwear to take a nap. Katariina yesterday apparently did not want to do this....so I found out that 2 members of the staff forcefully held her down and took her clothes off. Katja then went under a table and cried.Any comments??

    Please help.

    I didn't find the right solution from the Internet.

    References:

    Thanks!
    Last edited by JTCO; 04-25-2018 at 03:55 AM.

  7. #7
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    Does anyone else hate daycare? (

    HI,

    I hate dropping DS off there, and I look for any excuse to leave work early or start late so i can minimize his time there. They don't have the time to help him get to sleep gently, and so they keep him up until he's exhausted, wrap him (they must use kryptonite) and put him down, often for a 20 min 'rest'. When we pick him up he is almost always overtired and crazy, and hard to settle at bedtime.

    Please help.

    I didn't find the right solution from the Internet.

    References:

    Thanks!
    Last edited by JTCO; 04-25-2018 at 03:55 AM.

  8. #8
    Banned
    Join Date
    Mar 2018
    Location
    Adger
    Posts
    6

    Bars/Pubs/Clubs

    HI,

    I am visiting Prague early Feb with my family. I have a son who is 17 and he is bringing along 3 of his friends who are again all 17. I trust my son and his friends fully and when asked if it was possible if they could try out some of the bars and dancing clubs i said yes as long as you act in a respectable and responsible manner. I latter found out the drinking age in Prague is 18, will this be a problem for my son and his friends in terms of getting served for beer?

    Please help.

    I didn't find the right solution from the Internet.

    References:


    Thanks!
    Last edited by JTCO; 04-25-2018 at 03:55 AM.

  9. #9
    Meme King JTCO's Avatar
    Join Date
    Mar 2017
    Location
    Mom's Basement
    Posts
    4,214
    Quote Originally Posted by kevinmanuel View Post

    Unlike in the US, all kids are told they must disrobe all the way down to their underwear to take a nap. Katariina yesterday apparently did not want to do this....so I found out that 2 members of the staff forcefully held her down and took her clothes off. Katja then went under a table and cried.Any comments??


    I didn't find the right solution from the Internet.
    You're gone, spammer.

  10. #10
    That dude from Mississippi notnalc68's Avatar
    Join Date
    Mar 2017
    Location
    Madison, MS
    Posts
    2,288

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •