Evo mfg jlu bomber rockers with skins, 4 door

kingsize

EVO MFG Representative
Supporter
download.jpg
B2.jpg
1.jpg
2.jpg
The rocker panel on the JLU is arguably the most vulnerable area to
trail damage on the JLU and therefore adding additional protection to
this area is a must for most off roaders. Additionally, adding a flat
area to ease in entering and exiting your lifted JLU is commonly a
priority. The EVO MFG JLU Bomber Rockers are intended to do just that.
With their sleek design and 3/16” steel construction, these offer
increased protection to the rocker area on your JLU and have a nice flat
top to be used as a step if needed to get in and out of the vehicle.
The main Bomber Rocker mounts to the 3 large lower body mounts and
additionally with gusseted mounts at the front, middle and rear section
of the body seams. The ends are cropped specifically to clear 40”+
tires without interference. The underside remains close to body giving
great clearance and cut with multiple access holes to aid in
installation as well as allow easy cleaning of mud and debris.
For even more increased strength and protection the EVO MFG JLU Bomber
Rockers with Rocker Skins come complete with both driver and passenger
side Rocker skin panels giving even more rigidity and body protection.
These Rocker Skin Panels mount from your JLUs body panels (drilling
required) directly to the main lower EVO MFG Bomber Rocker increasing
their connections and distributing associated loads.
Both EVO MFG JLU Bomber Rockers and the Rocker Skin panels come in Bare
steel ready for powder coating or painting any color you choose.
Stainless steel and zinc plated hardware is included to complete
installation.


EVO-3036 EVO MFG JLU BOMBER ROCKERS WITH SKINS, 4 DOOR


 

Top