EVO MFG Jeep JL Protek Skid Package

kingsize

EVO MFG Representative
Supporter
download.jpg

EVO-3039B EVO MFG JL 3.6L Protek Engine Trans Skid

From the factory the Jeep Wrangler JL comes with decent skid plates for
most of the undercarriage components but the most important and
expensive components, engine and transmission, are left completely
unprotected and therefore vulnerable to trail damage. The EVO MFG JL
3.6L Protek Engine/Trans Skid Plate system protects these vital
components with a 3/16" Steel Skid, Laser cut and CNC Formed to give
ideal clearance and strength. Protecting the unprotected. EVO-3039B is
compatible with all EVO MFG JL Suspension Systems. Easy to install with
normal hand tools. No drilling, cutting or welding required. All
required installation hardware included.

EVO-3040B EVO MFG JL 3.6L Protek Exhaust Loop Skid

The driver side exhaust connection on the Jeep Wrangler JL 3.6L is a
complex configuration of exhaust tubing that rests below the frame and
therefore extremely vulnerable to trail damage. The EVO MFG JL 3.6L
Protek Exhaust Loop Skid is designed specifically to give protection to
these expensive exhaust components. Made from 3/16" Steel, Laser Cut
and CNC Press Brake formed. Easy to install with normal hand tools. No
drilling, cutting or welding required. All required installation
hardware included. Requires installation of EVO-3039/3039B. EVO-3040/3040B Not compatible with Long Arm Kits.

EVO-3041B.jpg
 

Last edited:

Rgk401

New member
View attachment 6530

EVO-3039B EVO MFG JL 3.6L Protek Engine Trans Skid

From the factory the Jeep Wrangler JL comes with decent skid plates for
most of the undercarriage components but the most important and
expensive components, engine and transmission, are left completely
unprotected and therefore vulnerable to trail damage. The EVO MFG JL
3.6L Protek Engine/Trans Skid Plate system protects these vital
components with a 3/16" Steel Skid, Laser cut and CNC Formed to give
ideal clearance and strength. Protecting the unprotected. EVO-3039B is
compatible with all EVO MFG JL Suspension Systems. Easy to install with
normal hand tools. No drilling, cutting or welding required. All
required installation hardware included.

EVO-3040B EVO MFG JL 3.6L Protek Exhaust Loop Skid

The driver side exhaust connection on the Jeep Wrangler JL 3.6L is a
complex configuration of exhaust tubing that rests below the frame and
therefore extremely vulnerable to trail damage. The EVO MFG JL 3.6L
Protek Exhaust Loop Skid is designed specifically to give protection to
these expensive exhaust components. Made from 3/16" Steel, Laser Cut
and CNC Press Brake formed. Easy to install with normal hand tools. No
drilling, cutting or welding required. All required installation
hardware included. Requires installation of EVO-3039/3039B. EVO-3040/3040B Not compatible with Long Arm Kits.

View attachment 6531

Will this work for a 2door jl sport
 

13_gecko_rubi

New member
If it’s anything like your JK plates I’m sure it will be the same.
The only area that would be different is that exhaust loop extra skid. The fuel tank on all 2 doors comes further forward than the 4 door, it actually comes well past the trans cross member up to the trans cross bar skid. I don't see anything that would effect on this. Might be tighter in that area. The powerpack on the 2l on the driver side might get pretty close to that exhaust part. But you shouldn't need that exhaust part on the 2L anyway I would think as there is no loop or crossover pipe.

Sent via....
 

Deezus

New member
Was gonna get this but as far as I know it doesn't come with easy slide bolt protectors.

Sent from my LG-H932 using Tapatalk
 

Top