If you don't mind me asking, where are you measuring from to get that 3/4"? I noticed a little lean to passenger but I don't recall it being that much.
I don’t mind you asking at all That’s from the top of tire to the fender.
So, I’m not comparing total lift before/after the install, I’m basically measuring the amount of “gap” between the top of tire to the fender.
This was of course on level ground (per the Jeep’s internal leveling display) and with tires that had just been filled to equal PSI.
6.5” of gap on the passenger side (front and rear) and 7.25” of gap on the driver side (front and rear). This is with Ridge Grappler 37x13.5r17s at 28 PSI.
Sent from my iPhone using JL Wrangler Jeep Forum mobile app