So here is my set up
2018 Rubicon JLU with a factory tow setup.
I replaced the stock class 2 hitch with a class 3 Draw tite Stock number 75515.
I used a Tekonsha 3014-p wire connector from the brake controller connection (gray plug above brake pedal) too connect to a Tekonsha P3 controller .
I’m towing a 2019 ForestRiver E-Pro 19 FBS with a dry weight of about 3100lb.
I also have a Fastway E2 6k weight distribution hitch too help keep it on the road.
And yes the auto start turns off and the traction control disabled itself...I was told this is “normal”
Sent from my iPhone
Thank so much for mentioning the Autostart, and the Traction control thing, I have asked Jeep and FCA about it, and no one can give me a answer, other than it's my non-mopar brake controller that is causing the issue, and I need to purchase a Mopar brake controller and the issue will go away, so I asked the Service rep to find me a part number for that, and while he's at it a pink fly elephant, because neither exists.
Sent from my SM-G955U using
JL Wrangler Jeep Forum mobile app