Search:

Type: Posts; User: Principal Skinr

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. Actually, the dampener may be the primary issue. ...

    Actually, the dampener may be the primary issue. My first one went about 16k with no issues. Then the next two replacements failed quickly. I put a $143 Fox stabilizer on there and the problem is...
  2. Thanks! They are fantastic. I'm now really...

    Thanks! They are fantastic. I'm now really thinking about losing the cowling mounted Rigid side shooters so that I can put the windshield down, Lol!
  3. 22,500 miles on mine. It was a very early build,...

    22,500 miles on mine. It was a very early build, as in December of 2017. It had no issues from the factory, and not even a fit/finish issue. I put on the Mopar lift and 35's and got some steering...
  4. I went with 1 and 2, with 1 being high beam. I...

    I went with 1 and 2, with 1 being high beam. I put the back lighting on 4 and my Rigid Side Shooters on 3.

    These things are outstanding!! I really appreciate the help and advice!

    BD was...
  5. Ok, question....Is Aux 3 ok to power the high...

    Ok, question....Is Aux 3 ok to power the high beams? That wire is tiny! I don't want to overload it.
  6. Ok, so I now see where the wires from the two...

    Ok, so I now see where the wires from the two lights are spliced, so we're good to go. I've cut it before the relay and have connected the ground and the running lights to Aux 4, to validate. I...
  7. Ok, I'm working through this. I think I'll do it...

    Ok, I'm working through this. I think I'll do it the easiest way first and wire the low beams to Aux 1, high beams to Aux 3, and back light to Aux 4. I'll take my chances that my wife and kids will...
  8. Are you saying to cut it between the BD switch...

    Are you saying to cut it between the BD switch and the relay or before the relay? Remember, there are separate settings for low/high.

    Here is a pic of the wires going into the switch...two red...
  9. I agree with you guys and will go with the Aux...

    I agree with you guys and will go with the Aux buttons, but here's the rub with doing it that way: The lights have a high and low beam setting. They can't be on simultaneously or the circuit boards...
  10. Wiring Through The Firewall...Manual Transmission

    I know the auto JL's have a plug in the firewall that covers a hole for mechanicals for manual transmission components. My JLUR is a manual, so I don't have that option. I'm looking for a way to...
  11. Ouch! Those are mean lights!

    Ouch! Those are mean lights!
  12. Part of the reason I'm going with them is that...

    Part of the reason I'm going with them is that Baja Designs told me they put out enough heat that snow won't freeze them over. I had my LED headlights freeze over a couple times. I've currently got...
  13. I think you are right. I just ordered the combos...

    I think you are right. I just ordered the combos from Northridge. They have 10% off today. I found that I can get the spot lenses for 35 bucks each if for some reason I want more throw. I doubt...
  14. Anybody Running Baja Designs' LP6 Lights?

    I'm getting ready to order a set of these bad boys. I'm just trying to decide between the spot or driving/spot combo. I'm leaning toward the combo, but wanted to see if anyone here has them and...
  15. I wonder what made them give up on the doors with...

    I wonder what made them give up on the doors with the holes in them at the JL introduction at SEMA 2017? I thought those were pretty cool.

    Maybe Bestop will do Core doors for the JL?
  16. Replies
    25
    Views
    2,229

    I know nothing about the EVO, but I've got the...

    I know nothing about the EVO, but I've got the Rancho and it certainly has beef/heft that I think will never be challenged by a JL. I'm very happy with it. I only wish there was a way to adjust the...
  17. Finally, an update! After the installation of a...

    Finally, an update! After the installation of a third steering stabilizer, which improved things a bit for maybe 1,000 miles, the shake appeared again with a vengeance. I thought about it and...
  18. Update....My dealer put a new drag link and tie...

    Update....My dealer put a new drag link and tie rod end on and it did absolutely nothing. I'll be putting that Rancho track bar on soon. I've just been too busy at work, but hearing others' results...
  19. Thanks! They look strong and nice! I personally...

    Thanks! They look strong and nice! I personally like the red!
  20. These look great! A few quick questions. 1,...

    These look great! A few quick questions. 1, along the lines of fluid dynamics, more directly, does the shape of the interior mirror that of the stock cover? 2., what is the little black hole below...
  21. One more question...How the heck do you get...

    One more question...How the heck do you get 150ft. lbs. of torque on that jam nut? Wow! Is there a torque wrench that can do those kinds of nuts? I've only seen socket-type torque wrenches. If so,...
  22. Eddie, I got the Rancho front track bar and...

    Eddie, I got the Rancho front track bar and initially installed it at the same exact length as the stock bar, mainly to check fitment and establish a base line to see the benefit of the Rancho with...
  23. Replies
    65
    Views
    6,491

    Yep, in the Star Case there are new specs. I'm...

    Yep, in the Star Case there are new specs. I'm guessing more toe-in along the lines of what Eddie recommended.
  24. Replies
    6
    Views
    670

    Here is a link. Look at the lines near the top. ...

    Here is a link. Look at the lines near the top. It is a direct replacement for a Northstar, and is even in the description and link. It also looks like there is a $30 rebate, too, which puts it...
  25. Replies
    6
    Views
    670

    I bought a Northstar badged as an X2. They are...

    I bought a Northstar badged as an X2. They are not Odyssey. Batteries Plus will tell you they are Northstars and they come from the Northstar factory. Look at the casing, too, and you can tell. ...
Results 1 to 25 of 200
Page 1 of 8 1 2 3 4