Lug nuts for Atx Slab Wheels on a JLUR.

wibornz

New member
The stock wheels use a lug nut that is rounded where it comes into contact with the wheel. The ATX Slab wheels use lug nuts that contact the wheel with a flat surface. Any idea what I need for lug nuts?
 

13_gecko_rubi

New member
The stock wheels use a lug nut that is rounded where it comes into contact with the wheel. The ATX Slab wheels use lug nuts that contact the wheel with a flat surface. Any idea what I need for lug nuts?

Take a picture. The slabs should still use 60 deg conical style lug nuts. If they are flat you need hub centric wheels which the slabs are not. Every KMC / ATX wheels I’ve owned used conical lugs. The stock ones are likely too big diameter so you’ll need to switch to spline type which are much smaller diameter. Since you are in Michigan, Belle tire has them reasonably priced. You need 14mm conical spline lugs. But take picture first if you can.


Sent from my iPad using JL Wrangler Jeep Forum mobile app
 

YAHAHA

New member
If you need a set like shown above, I have a set I ordered but didn't need.


It's not just a Jeep, it's an amusement park on wheels.
 

wibornz

New member
Thannks guys, i found what I needed at Discount tire. They are like the ones in the picture above.
 

Top