Does anyone know if JK sway bar disconnects will also work on JL?
Sent from my iPhone using JL Wrangler Jeep Forum mobile app
Sent from my iPhone using JL Wrangler Jeep Forum mobile app
I also made some quick disco's using a grade 8 clevis pin with cotter pin that was 1/2in diameter and 2 1/2in length. Used some washers to snug it up. My buddy had some JK sway bar links laying around and we drilled the lower link to 1/2 diameter.
It made a lot of noise because the actual bracket hole is larger than 1/2in. I don't recommend it! So I am back to normal bolts and just unbolt them.
I only disconnect the driver side. Takes less then a minute with wrenches.